WHAT YOU WILL GET
Most of our stickers come with a clear transfer film for easy fitting in one go as opposed to sticking on separate pieces individually (I mean, how annoying would that be right?)
Our online fitting guide contains information on how to apply stickers correctly.
WHAT CAN YOU STICK OUR STICKERS TO
Our stickers will stick to any smooth painted surface or any glass that is thoroughly cleaned and free from dust, dirt, grime, and grease. e.g. windows, cars, bikes, smooth walls, toolboxes, ect.
Please do not fit our stickers on freshly painted surfaces. We recommend waiting at least 30 days before fitting any stickers to allow the paint to fully cure and off-gas.
Please note our stickers are not suitable for any textured surfaces. This includes textured/wallpapered walls, surfaces that contain rust, damaged lacquer or any other paint damage, stickers will also not stick to certain textured/bare plastics commonly used in vehicle interiors or ‘bare’ bumper trims.
TIPS & OTHER INFORMATION
Cleaning and drying the surface is the MOST IMPORTANT part of fitting any sticker. It’s all in the prep!
Glass surfaces are even harder to clean thoroughly. Spend extra time cleaning and drying the glass before fitting.
Temperature is also important for fitting decals. Fitting stickers in the cold or onto cold surfaces is not recommended (below 10°C)
If fitting stickers in lower temperatures, try to do so in direct sunlight. Alternatively, you can provide a small amount of heat to the surface beforehand with a heat gun or hairdryer (Do not over-heat the area). Heating the decal again just before removing the transfer film can greatly improve adhesion and will allow the transfer film to peel away cleanly.
Large stickers and Sunstrips are easier to fit with two people, so grab a friend (One that won’t stick it wonky though!).
Stickers are not reusable once stuck they can’t be repositioned. Make sure you are happy with the position before fitting. If removed properly they should leave little to no residue behind. Using a heat gun or hairdryer can make removing stickers easier if they have been on for some time.
It is not advised to fit stickers to poorly prepped paint. Even if the paint is fully cured, the sticker may still take paint with it when removed if the paint job was low quality or the surface was not properly prepared.
NEED MORE HELP?
If you are unsure of how to fit your decal or sunstrip please see our fitting guide or we would recommend contacting your local sign writer/professional to fit it for you. If you have any additional questions for us just get in touch through our contact us page. We will happily try to help you!