Prefer a Video? See our Fitting Guide
1. Clean the surface with water and a drop of dish soap, Ensure the surface is completely dry before proceeding.
2. Prepare the sticker for application by firmly rubbing a squeegee over the sticker to ensure the vinyl is stuck to the transfer tape, This also removes any air bubbles which may have occurred during shipping.
3. Flip the sticker over so it is the wrong side up and peel the backing paper away from the transfer tape, if the vinyl stays on the backing paper repeat the above step.
4. Carefully apply the sticker to the surface and rub over it with a squeegee or an old credit card working from the middle outwards to stick the sticker to the surface.
5. Slowly peel away the transfer tape at a 45° angle angle peel slow and steady making sure the sticker sticks to the surface and doesn’t lift.
6. All Done! Take a snap and tag us on Instagram!
Important Note:
Temperature is an important factor when fitting decals. Fitting in the cold (below 10°C) or onto cold surfaces is not recommended.